Kobalt SGY-AIR145 Mode D'emploi page 12

OPERATING INSTRUCTIONS
(3) Remove the left and middle lock screws (G)
with the provided hex key (AA) from the cutter
housing (H). Pull out the blades (C, D, E).
Remove the two spacers (I).
(See Figure 5-a, 5-b & 5-c)
5-b
(4) Assemble the new blades (C, D, E) with the
two spacers (I) staying in the same correct
position. (See Figure 6)
5-a
5-c
6
12