Kohler STERLING Finesse 5700 Serie Guide D'installation page 6

Apply sealant
5. Install Bottom Track
- Remove the bottom track from the shower ledge.
- Apply a bead of silicone sealant into the groove on the underside of the track and a small bead on the opposite
leg.
- Install bottom track on ledge at location marked in step 2.
6. Install Wall Jambs
- Place wall jamb over the bottom track. Align the holes in the wall jamb with the holes in the wall.
- Secure the wall jambs to the wall with 3 #8 18 x 1-1/2" panhead screws. Insert a screw through a bumper at top
and bottom of wall jamb.
- Repeat steps to install the other wall jamb.
C
1017313-2-
Bottom Track
Align holes in
wall jamb with
holes in wall
6
Bumper
#8-18 x 1-1/2"
Panhead
Screw
Sterling