Table des Matières
Publicité
Accessories
The parts required for the exhaust
air system can be obtained from
customer service or your local
dealer. Please follow the installation
instructions supplied by the
appropriate manufacturer!
Side exhaust kit
part no. WZ20365
Note:
The maximum permitted number of
90° elbows (including this side
exhaust kit) is four!
i
Special tool for cutting the hole
in prepared side panel is
required. Contact local dealer!
Bottom exhaust kit
part no. WZ20370
Note:
The maximum permitted number of
90° elbows (including this side
exhaust kit) is four!
Left hinge kit
part no. WZ20360
The door catch can be reversed if
necessary. The door is hinged on
the right at the factory.
Pedestal Mounting
If mounting the dryer on the
Siemens pedestal (accessory no.
WZ 20395) follow the instructions
supplied with the pedestal.
i
Install pedestal prior to
removing transport bolts.
11
Publicité
Chapitres
Table des Matières
