Hilti SIW 9-A22 Notice D'utilisation Originale page 11

2.3 Careful handling and use of batteries
▶ Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C
(176 °F).
▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. In this case, always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Contact Hilti Service.
3 Description
3.1 Product overview
3.2 Intended use
The product described is a hand-held cordless impact wrench. It is designed for tightening and releasing
nuts, bolts and anchors and for driving wood screws. Accessory tools (e.g. sockets) are attached by way of
a square drive with through hole.
The impact wrench may be used only for applications that require no precise / specified torque. Failure to
observe this point presents a risk of over-tightening and damage to the bolt, screw or workpiece.
Use only Hilti lithium­ion batteries of the B 22 series with this product.
•
• Use only Hilti-approved battery chargers to charge these batteries. More information is available from
your Hilti Store or from www.hilti.group
3.3 Items supplied
Impact wrench, operating instructions.
*2113750*
1
2113750
3/4" square drive with through hole
@
Forward/reverse switch with switch-on inter-
;
lock
Control switch
=
Grip
%
Work-area light
&
Belt hook (optional)
(
Battery
)
Charge-status and fault indicator (Li-ion bat-
+
tery)
Release button with additional function
§
(charge status display activation)
English 5