Bond HYFP50095-53 Guide D'utilisation page 6

ASSEMBLY INSTRUCTIONS
1. Check that the control knob (J) for the gas
supply system is turned to the "OFF" position
before starting any assembly.
2. Attach front panel (B) and back panel (C) to 1pc
side panel (D) using 4pcs washers (BB) and 4pcs
M6x15 screws (AA).
Attach 1pc side panel (D) to front panel (B) and
back panel (C) using 4pcs washers (BB) and
4pcs M6x15 screws (AA).
3. Attach steel base to the bottom part of the
table top (A) using 4pcs washers (BB) and
4pcs M6x15 screws (AA).
Bond Manufacturing Co., Inc. | Page 6
D
B
BB
AA
AA
BB
A
J
C
D