Device Description; Safety Instructions - WEBTEC HPM110 Manuel D'utilisation

1. Device description

The HPM110 SR-HPM-110-MT/SR-HPM-110-UN, hereinafter referred
to as HPM110, is used to measure pressure. Dynamic pressure peaks
are measured at a sampling rate of 10 ms (100 measured values/sec-
ond). The MIN/MAX memory is continuously updated and overwritten.
Scope of delivery and accessories
Check the scope of delivery and the accessories ordered. If anything is
missing, contact your sales office.
■
HPM110 SR-HPM-110-MT with adapter M16x2 or
HPM110 SR-HPM-110-UN without adapter
■
Mini USB cable (data logger version only)

2. Safety instructions

Before working with the HPM110, read and follow this operating man-
ual. Disregarding the instructions, especially the safety information, can
result in danger to people, the environment, equipment and the system.
The HPM110 corresponds to the current state of the art in terms of
accuracy, functionality and safe operation of the devices.
Device description
7