Menu - WEBTEC HPM110 Manuel D'utilisation

Display
Battery
REC
x10
3.2

Menu

The following settings are configured in the menu:
■
Switch automatic shutdown on/off
■
Set the measuring unit (bar, mbar, PSI, kPa, MPa)
■
Adjust filter setting (damping)
■
Delete saved measurement data (data logger version only)
■
Display serial number
Press the ZERO/MENU key for 2 s to activate the menu.
Press the ZERO/MENU key again to select the next function.
Press the RESET/OK/START-STOP key to save the function - the
HPM110 switches to the actual value display.
Description
Displays the battery status (5 segments).
Flashes when data logging is active (only with data
logger version)
Display value (actual value display and MIN/MAX
display) x10.
Layout and function
13