Set The Measuring Unit - WEBTEC HPM110 Manuel D'utilisation

4.8

Set the measuring unit

You can have the measured value displayed in bar, PSI, mbar, kPa or
MPa.
1
Press the ZERO/MENU key for 2 s.
2
Press the ZERO/MENU key repeatedly until the desired unit
UNIT bar/UNIT PSI/UNIT mba/UNIT KPa/UNIT MPa is
shown on the display.
3
When the desired measuring unit is displayed, press the RE-
SET/OK/START-STOP key.
Ä The set measuring unit is saved.
Operation
21