Set The Date And Time (Data Logger Version Only) - WEBTEC HPM110 Manuel D'utilisation

Operation
4.13

Set the date and time (data logger version only)

1
Press the MIN/MAX/FS key for 2 s.
2
Press the RESET/OK/START/STOP key.
3
Enter year: The MIN/MAX/FS key decreases the number by 1,
the ZERO/MENU key increases the number by 1.
4
Press the RESET/OK/START/STOP key.
5
Enter month: The MIN/MAX/FS key decreases the number by
1, the ZERO/MENU key increases the number by 1.
6
Press the RESET/OK/START/STOP key.
7
Enter day: The MIN/MAX/FS key decreases the number by 1,
the ZERO/MENU key increases the number by 1.
8
Press the RESET/OK/START/STOP key.
9
Enter hour: The MIN/MAX/FS key decreases the number by 1,
the ZERO/MENU key increases the number by 1.
10 Press the RESET/OK/START/STOP key.
11 Enter minute: The MIN/MAX/FS key decreases the number by
1, the ZERO/MENU key increases the number by 1.
26