Set Automatic Shutdown - WEBTEC HPM110 Manuel D'utilisation

Operation
4.9

Set automatic shutdown

■
PO OFF: Continuous operation
■
PO ON: Automatic shutdown after 5 min
1
Press the ZERO/MENU key for 2 s.
2
Press the ZERO/MENU key until PO OFF or PO ON is shown
on the display.
3
If the desired automatic switch-off is already active, wait until
the actual value is displayed again.
4
If the desired automatic switch-off is not active, press the RE-
SET/OK/START-STOP key.
Ä The saved setting remains saved even after switch-off.
22