Figure 5-36: Reboot - Cisco Systems LINKSYS AG241 Guide D'installation Rapide

ADSL2 Gateway with 4-Port Switch
Reboot
This tab allows you to do a soft or hard reboot of your Gateway.
Reboot Mode. To reboot your Gateway, select Hard or Soft. Choose hard to power cycle the Gateway or soft to
restart it without a power cycle.
To begin the reboot process, click the Save Settings button. When a screen appears asking you if you really
want to reboot the device. Click OK.
Click the Cancel Changes button if you want to undo your changes.
Chapter 5: Configuring the Gateway
The Administration Tab

Figure 5-36: Reboot

36