Figure 5-30: Reporting; Figure 5-31: System Log - Cisco Systems LINKSYS AG241 Guide D'installation Rapide

ADSL2 Gateway with 4-Port Switch
Identification. To enable SNMP, click Enabled. To disable SNMP, click Disabled.
UPnP
UPnP allows Windows XP to automatically configure the Gateway for various Internet applications, such as
gaming and videoconferencing.
UPnp. To enable UPnP, click Enabled.
Please select a pvc connection to bind. Select a number from the drop-down menu.__________________
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes.
Reporting
The Reporting tab provides you with a log of all incoming and outgoing URLs or IP addresses for your Internet
connection. It also provides logs for VPN and firewall events.
• Log. To enable log reporting, click Enabled.
• Logviewer IP Address. Enter the IP Address that will receive logs into the field.

Figure 5-30: Reporting

Email Alerts
E-Mail Alerts. To enable E-Mail Alerts, click Enabled.
• Denial of Service Thresholds. Enter the thresholds of events you want to receive.
• SMTP Mail Server. Enter the IP Address of the SMTP server in the field.
• E-Mail Address for Alert Logs. Enter the e-mail address for alert logs in the field.
• Return E-Mail address. Enter the address for the return e-mail.
To view the logs, click the View Logs button.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click

Figure 5-31: System Log

the Cancel Changes button to undo your changes.
Chapter 5: Configuring the Gateway 33
The Administration Tab