Cry Alert - Philips Avent SCD585/26 Mode D'emploi

If the temperature is below or above the set range, the temperature alert symbol on the
,
display has only one segment and flashes. The message 'TOO COLD' or 'TOO HOT' appears
on the display (Fig. 27).
Humidity
Maintaining a healthy humidity level for your baby is important. The optimal humidity
level is between 40% and 60%. You can set a humidity range and an alert.
1 To open the humidity submenu, select 'Humidity' in the menu. Press OK to confirm.
2 Select 'Hum Range' in the humidity submenu and press OK to confirm.
3 Use the + and - buttons to set the minimum humidity range between 20% and 50% and the
maximum humidity range between 51% and 70%. Press OK to confirm.
4 Select 'Alert' in the humidity submenu. Press OK to confirm.
5 Choose one of the alert options. The options available are sound only, sound and vibration,
vibration only and display only. Press OK to confirm. The humidity alert symbol appears on
the display.
If the humidity is below or above the set range, the humidity alert symbol and the humidity
,
measured flash on the display. The message 'TOO DRY' or 'TOO HUMID' appears on the
display (Fig. 28).

Cry alert

You can set a cry alert to warn you that the baby is crying.
1 Select 'Cry alert' in the menu with the + and - buttons. Press OK to confirm.
2 When the display shows 'Vibration ON', press OK to confirm. The cry alert indicator appears
on the display.
The cry alert goes off when the sound in the baby room is loud enough to make the fourth
,
sound level light go on. The parent unit vibrates and the message 'Cry alert' appears on the
display for 4 seconds. The cry alert repeats every 8 seconds until the sound becomes less
loud or you deactivate the cry alert (Fig. 29).
3 To deactivate the cry alert, select 'Cry alert' in the menu. When the display shows 'Vibration
OFF', press OK to confirm.
Clock
The default setting for the clock is hidden. You can choose to show the clock and set the clock time
in the menu of the parent unit.
1 Select 'Set clock' in the menu with the + and - buttons. Press OK to confirm.
2 Select 'Show Time' and press OK to confirm.
3 Select 'Set the time' and press OK to confirm.
4 Set the hour and the minutes and press OK to confirm.
The clock time alternates with other indications in the message field of the display.
,
Language
You can use this menu option to change the language setting.
1 Select 'Set language' in the menu with the + and - buttons. Press OK to confirm.
2 Use the + and - buttons to select your language and press OK to confirm.
ENGLISH
13