Product Description And Specifications - Bosch GWS 18 V-LI Professional Notice Originale

OBJ_BUCH-1102-007.book Page 19 Thursday, October 27, 2016 2:35 PM
Additional safety warnings
Wear safety goggles.
 Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age.
 Do not touch grinding and cutting discs before they
have cooled down. The discs can become very hot while
working.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
 In case of damage and improper use of the battery,
vapours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Use the battery only in conjunction with your Bosch
product. This measure alone protects the battery against
dangerous overload.
 The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Technical Data
Angle Grinder
Article number
Rated voltage
Rated speed
Grinding disc diameter, max.
Thread of grinder spindle
* depending on the battery pack being used
** Limited performance at temperatures <0 °C
Bosch Power Tools
Intended Use
The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Direction-of-rotation arrow on housing
2 Spindle lock button
3 On/Off switch
4 Hex key
5 Battery pack*
6 Battery unlocking button*
7 Auxiliary handle (insulated gripping surface)
8 Grinder spindle
9 Locking screw for protection guard
10 Protection guard for grinding
11 Mounting flange with O-ring
12 Grinding wheel*
13 Clamping nut
14 Quick-clamping nut
15 Carbide grinding head*
16 Protection guard for cutting*
17 Cutting disc*
18 Hand guard*
19 Rubber sanding plate*
20 Sanding sheet*
21 Round nut*
22 Cup brush*
23 Button for charge-control indicator*
24 Battery charge-control indicator*
25 Handle (insulated gripping surface)
26 Cutting guide with dust extraction protection guard *
27 Diamond cutting disc*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GWS 18 V-LI
3 601 J3A 300
V= 18
-1
min 10000
mm 115
M 14
English | 19
*
GWS 18-125 V-LI
3 601 J3A 301
18
10000
125
M 14
1 609 92A 2DJ | (27.10.16)