Beyerdynamic Synexis TP8 Information De Produit page 8

button , the channel will automatically be stored after approx. 3 seconds.
If you would like to lock the selected channel to avoid accidental shifting,
hold down the Set button
displayed . The channel is locked.
If you would like to unlock a locked channel, hold down the Set button
about 3 seconds. The key symbol in the display
4. To display the frequency, press the Set button
displayed
5. If you would like to mute the connected microphone, press the mute button
The LED will flash red. "Mute" is displayed
function, press the mute button
6. You can connect an audio source (e.g. MP3 player) to the Line In input
you want to play recordings during guided tours.
7. Attach the transmitter to your clothing or belt with the belt clip. As an alter-
native you can wear the transmitter around your neck with a lanyard. Remove
the belt clip
lanyard to right and left hand side
8. After use turn off the beltpack transmitter with the on/off switch
LED will go out.
for a few seconds.
and the lid of the battery compartment
for about 3 seconds. A key symbol will be
briefly. The frequency will be
. In order to turn off the mute
once again.
.
will disappear.
. and mount the
for
.
, if
. The