Faults - WIKA GDI-100-D Mode D'emploi

7. Faults

7. Faults
Personnel: The plant operator must ensure that the handling of SF₆ gas is only carried
out by a qualified company or by qualified persons who have been specifically trained in
EN
accordance with IEC 61634, section 4.3.1 or IEC 60480, section 10.3.1.
Protective equipment: Protective gloves, safety goggles
Tools: SW 27 open-ended spanner or torque spanner
WARNING!
Physical injuries and damage to property and the environment caused
by hazardous media
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable
or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,
radioactive), and also with refrigeration plants and compressors, there is a
danger of physical injuries and damage to property and the environment.
Should a failure occur, aggressive media with extremely high temperature
and under high pressure or vacuum may be present at the instrument.
▶
▶
CAUTION!
Physical injuries and damage to property and the environment
If faults cannot be eliminated by means of the listed measures, the
GDI-100-D must be taken out of operation immediately.
▶
▶
▶
For contact details see chapter 1 "General information" or the back page of
the operating instructions.
32
For these media, in addition to all standard regulations, the appropriate
existing codes or regulations must also be followed.
Use the requisite protective equipment.
Ensure that pressure or signal is no longer present and protect against
accidental commissioning.
Contact the manufacturer.
If a return is needed, please follow the instructions given in chapter 9.2
"Return".
WIKA operating instructions, model GDI-100-D