Normal Operation; Menu Functions - WIKA GDI-100-D Mode D'emploi

6. Commissioning, operation
6.2

Normal operation

Make a long press on the [On/Off] button, in order to activate the precision digital gas
density indicator. Push the button again to turn it off.
After switching on, the start-up screen with pressure range and firmware version is shown
on the display for approx. 3 seconds.
Zeroing the display: Press and hold the [ZERO] button.
The gas density indicator must be set to 0 with the [ZERO] button before each use.
6.3

Menu functions

▶
Press [MENU] button to start
Press the buttons (▶) to enter the individual menu level.
Select the parameters and the menu level using the buttons (▼ or ▲).
Menu level 1 Menu level 2
Measuring mode
Unit
WIKA operating instructions, model GDI-100-D
Menu level 3
g/l
kg/m³
SF6bar abs.
SF6Mpa abs.
SF6kPa abs.
SF6psi abs.
SF6bar rel., default
SF6MPa rel.
SF6kPa rel.
SF6psi rel.
bar
mbar
psi
kg/cm²
Pa
kPa
hPa
MPa
mmH O
2
mH O
2
inH O
2
inH O (4 °C)
2
inH O (60 °F)
2
inH O (20 °C)
2
ftH O
2
mmHg
cmHg
EN
19