Pressure Units; Automatic Power-Off - WIKA GDI-100-D Mode D'emploi

6. Commissioning, operation
Menu level 1 Menu level 2
Time
Time format
Date
Date format
Factory reset
Info
S# (e.g.: 1A00023458)
T# (e.g.: ABCDEFG12345)
MR: (e.g.: 0 ... 16 bar)
ManufDat. (e.g.: 10/05/2018)
CalibDat. (e.g.: 10/05/2018)
Firmware
Memory status
Op hrs
O. pressure
O. temp

6.3.1 Pressure units

The GDI-100-D is factory preset to the SF
abs..

6.3.2 Automatic power-off

The time duration for automatic power-off can be selected from four predefined and fixed
steps. Thus it can be set to "5 min", "15 min", "30 min" or "Off". With "Off", the instrument
remains activated until it is switched off using the [ON/OFF] button or until the batteries
are empty. If a time has been set, then the GDI runs from the last button press for this time
and then switches itself off automatically. Also, during a wireless transmission or through
a log, the time is stopped and restarted after completion of this.
WIKA operating instructions, model GDI-100-D
Menu level 3
hh : mm : ss [AM / PM]
24 h (default)
12 h [AM / PM]
DD / MM /YYYY
dd.mm.yyyy (default)
dd/mm/yyyy
mm/dd/yyyy
yyyy-mm-dd
No (default)
Yes
= serial number
= tag number
= measuring range
= date of manufacture
= calibration date
In %
[d h]
[bar]
[ °C]
temperature-compensated unit of SF6bar
6
EN
23