Setup Menu - Seg Trento Serie Mode D'emploi

Trento 60cm LED BLU-TV
• Hotel Mode
Hotel Mode: Press the ▲ ▼
the ◄ / ► buttont to select Off or On.
Source Lock: Press the
press the button to select source you want to lock.
◄ / ►
Default Source: Press the
press the ◄ / ► button to select source you want. Default Source If
you select Off, the default source will be the last source you select
before you turn off the TV.
Default Prog: Press the
press the ◄ / ► button to select program you want. Only when you
select the ATV as the Default Source, you can select the Default Channel.
Max Volume: Press the
The volume can't be adjusted above the Max Volume.
Clear Lock: Press the ▲ ▼
before.
Configuring the Setup Menu
• OSD Language
Press the ▲ ▼ / button to select
to enter sub-menu. Press the /
• TT Language
Press the ▲ ▼ / button to select TT
enter sub-menu. Press the /
• Hearing Impaired
Press the / button to select Hearing Impaired, then press
▲ ▼
button to select On or Off.
• Aspect Ratio
You can select the picture size which best corresponds to your viewing requirements.
• First Time Installation
Press the ▲ ▼ / button to select First Time Installation, then press the
language, country and Channel Tuning.
• Reset
Restore the system settings to the factory default.
• Software Update(USB)
Press the ▲ ▼ / button to select Software Update(USB), then press
Configuring the Screen Menu (In PC mode)
• Auto Adjust
Adjust the image automatically.
• H-Offset
Centre the image by moving it left or right.
• V-Offset
Centre the image by moving it up or down.
• Size
Adjust the screen size.
/ butt on to select Hotel Mode, then press
▲ ▼ / button to select Source Lock, then
/ button to select Default Source,
▲ ▼
▲ ▼ / button to select Default Prog, then
▲ ▼ / button to select Max Volume, then press the
/ button to select Clear Lock, then press
OSD Language, then press ENTER button
▲ ▼ / ◄ / ► button to select OSD language.
Language, then press ENTER button to
▲ ▼ button to select TT language.
then
◄ / ► button to adjust. After set the Max Volume,
ENTER button to clear the setting you have done
ENTER
ENTER button to set relevant options including OSD
the ENTER button to update software using USB.
15