Menu Operation; How To Navigate Menus; Channel Menu - Seg Trento Serie Mode D'emploi

Menu Operation

How to Navigate Menus

Before using the TV follow the steps below to learn how to navigate the menu in order to select and adjust different functions.
The access step may differ depending on the selected menu.
1. Press the MENU button to display the main menu.
2. Press the ◄/► button to cycle through the main menu.
3. Press the / ▲ ▼button to select the desired sub item.
4. Press the ENTER button to access the submenu.
5. Press the / / ◄/►
▲ ▼
menu.
6. Press the MENU button to return to the previous menu.
7. Press the EXIT button exit from the menu.
NOTE:
When an item in MENU is displayed gray, it means that the item is not available or cannot be adjusted.
Buttons on the TV have the same function as corresponding buttons on the remote control. If your remote control is lost or
couldn't work, you may use the buttons on the TV to select menus. This manual focuses on operation of the remote
control.
Some items in the menus may be hidden depending on modes or signal sources used.
Configuring the Channel Menu
• Auto Tuning
Select the ENTER button to start Auto Tuning. The TV will begin
memorizing all of the available channels.
• ATV Manual Tuning
Manual store for ATV channels.
Press the / ▲ ▼ button to select items. Press the
Press the EXIT to exit.
• DTV Manual Tuning (This menu can only show when the digital type is
DVB-T)
Manual store for digital channels.
◄/►
Press the button to select channel.
Press the ENTER button to search.
Press the EXIT button to exit.
• CATV Manual Tuning (This menu can only show when the digital type is DVB-C).
You can select the Frequency, Symbol, QAM Type on you own.
• Programme Edit
Press the ▲ ▼ / button select items.
Press the red button to delete the channel.
Press the green button to rename the channel. (In ATV mode)
Press the yellow button to move the channel. (Except DTV channels with LCN)
Press the blue button to skip the channel.
Press the button to set the favorite channel.
The CH+/CH- button can be used to select the following or preceding page.
• Signal Information (In DTV mode)
Display the current Signal Information.
• CI Information (In DTV mode)
This function enables you to watch some encrypted services (pay services).
Please insert CI card into the PCMCIA slot according to the arrow on the CI card.
button to select the desired value. The adjustment in the OSD may differ depending on the selected
◄/►
button to adjust it.
12
Trento 60cm LED BLU-TV