Introduction To System Hardware; Leviton Hdf3168 Mda Frame System Components - Leviton F3168-22F Manuel D'installation Et D'utilisation

3 INTRODUCTION TO SYSTEM HARDWARE

The Leviton HDF3168 MDA Frame system hardware can be divided into five major
classifications. These are:

• Leviton HDF3168 MDA Frame System Components

• Leviton HDF3168 MDA Frame Connectivity Components
• Leviton HDF3168 MDA Frame Cross Frame Routing Components
• Leviton HDF3168 MDA Frame Enclosure Components
3.1 Leviton HDF3168 MDA Frame System Components
The System Components are:
MDA High Density Frame: The frame is an 84 in. high x 24 in. wide x 20.4 in. deep equipment
frame designed to fit within a 24 in. x 24 in. space. The frame allows for the placement of any
combination of up to 22 Patch decks, Splice Decks, Cross Frame Routing Trays or Blank
Plates. The frame can either be mounted directly to the structural floor or on Raised
Access Floor.
MDA High Density Frame
NOTE: HDF3168 MDA Frames must be mounted to the building structure.
Cable Management Door
9
HDF Rear view