Recommended Tools; Required Materials Per Frame - Leviton F3168-22F Manuel D'installation Et D'utilisation

2 SYSTEM DEFINITION

2.6 Recommended Tools

The following tools are recommended for successful installation of the HDF3168 Frame and
components.
• Hammer Drill
• 5/8 in. masonry drill bit
• #2 Philips screw driver with minimum 8 in. shaft and magnetic tip
• Socket set
• 1/2 in.Torque wrench
• Hand or electric saw with metal blade
For Raised Floor installations add:
• 5/8 in. Hardened Steel Drill Bit
• Plumb Bob and string
• Universal step bit

2.7 Required Materials per Frame

The following materials are required for successful installation of the HDF3168 Frame and
components. (Listed materials are not included in Leviton provided HDF3168 products. Quantities
below are the minimum required and may vary depending on the actual mounting environment).
• (4) 5/8 in. diameter 1/2 in. x 13 thread Hex Head Anchors
• (4) 1/2 in. x 13 Thread Bolts (when direct to concrete slab)
• (1) 1/2 in. Threaded Rod (when mounted on Raised Access Floor)
• (4) 1/2 in. Split Lock Washers
• (4) 1/2 in. Fender Washers
• (4) 1/2 in. x 13 Thread Nuts
• Velcro ® Tie wraps (recommended bulk rolls – example Leviton #43115-075)
8