Product Terms - Leviton F3168-22F Manuel D'installation Et D'utilisation

2 SYSTEM DEFINITION

2.2 Product Terms

Term
HDF3168 Fiber
Distribution System
Frame
Patch Deck
Patch Tray
MTP ® to "X" cassette
Adapter Plate
Splice Deck
Splice Deck Tray
Splicing Tray
Cross-Frame
Routing Tray
Cable Management
Spool
Cable Clamp
Louver
Cable Management
Bracket
Description
Leviton's combination of mounting, termination and patching
hardware that enables modular, scalable, high density patching.
Physical structure to which network equipment is attached. The term
Frame refers to the Leviton specific product.
A Deck is a Leviton specific product that mounts in a Frame. Each
Deck can house any combination of up to 12 Cassettes, Adapter
Plates or Blank Plates.
A Cassette Tray is a Leviton specific product that mounts in a Deck.
Each Tray can house up to 2 MTP
cassette or 2 adapter plates with various connector options.
High Density cassette providing transition connectivity from MTP
trunks to patchable ports where "X" is LC, SC or MTP
Cassettes are available in single or double cassette configurations.
High Density "cassette" style plate providing pass through
connectivity of either quad LC, duplex SC or duplex MTP
adapter format.
A Splice Deck is a Leviton specific product that mounts in a Frame.
Each Splice Deck can house up to 3 Splice Trays.
A Splice Deck Tray is a Leviton specific product that mounts in a
Deck. Each Splice Tray can house up to 2 24-strand Splice trays.
A Splicing Tray is a Leviton specific product that mounts on a Splice
Deck Tray. Each Splicing Tray can house up to 24-strands of
spliced fiber.
A Routing Tray is a horizontal pathways system that mounts
specifically in a Leviton Frame. Each Routing Tray allows for the
routing of Fiber Optic Cable assemblies to other Frames, Racks
or Cabinets.
Large "mushroom shaped" cable management devices for bend
radius compliant cable routing and patching.
A clamping bracket device that accepts various cable sizes and
quantities for simple mounting to the HDF3168 Frame.
Quarter round fingered cable management devices for bend radius
compliant cable routing from each deck tray. Each Louver slot
provides cable management control for 2 deck trays.
Rear frame cable management devices for bend radius compliant
cable routing from each cable clamp to its target deck and
specific tray.
6
® single cassettes, 1 double
® format.
®
®