Eden ACCESS-IT UNIT Notice Technique page 39

Technical information ACCESS-IT UNIT
You can set up to 32 time ranges over 8 days (Monday to Sunday plus public holidays) of 10 periods per
day.
1) Select the range to be configured using the "+" and "-" scroll keys, then press "V" to confirm.
2) Configure your time range.
The display is as follows:
When the cursor flashes, this means that you have to choose the object to configure (Day / Period number
/ Time / End of configuration). Scroll through the different objects using the "+" and "-" keys then press
"V" when you have chosen the object to be configured. The cursor then becomes fixed.
3) Configure the times. Once the object "Time" (00:00 TO 00:00) has been selected, use the "<" and
">" keys to determine the times, then press "V" to advance the cursor through the different times.
4) End of configuration.
Position the flashing cursor on "OK" then confirm using the "V" key.
USER ACCESS
PERIODS
The configuration is done in the same way as for the time ranges for the devices.
PUBLIC HOLIDAYS
Select a period, then "Modify", confirming with the "V" key.
FROM 01/01/00
TO 01/01/00
The following message then appears:
RENEWAL?
DEACTIVATED
To return a period to zero, select "ERASE" for the desired period and then confirm via the "V" key.
CONFIGURE
SITE CODES
DISTRIBUTOR
CODES
QUIT MENU?
Time period
Day of the week
User access periods. You can set up to 64 time ranges over 10 days
(Monday to Sunday plus public holidays) of 10 periods per day for users.
Public holidays. You can configure up to 32 renewable periods (or not) on
the control unit. To add a holiday or list of specific days, proceed as follows:
Scroll through the days, months and years and then press "V" to confirm.
When you choose "ACTIVATED", once the date has passed, the holiday
or period will automatically be renewed for the following year.
Configure site codes. Here you can configure up to 16 site codes for
the control unit. For this, scroll through the list, confirm with the "V" key
and then enter your site code.
Configure distributor
codes for the control unit. For this, scroll through the list, confirm with
the "V" key and then enter your distributor code.
Quit the menu. Allows you to quit the configuration menu.
Period number
MONDAY (1)
00:00 TO 00:00 OK
codes. Here you can configure up to 16 distributor
p.39/42
End
of
configuration