Contrast Adjustment - Eden ACCESS-IT UNIT Notice Technique

Technical information ACCESS-IT UNIT
o Deleting users: Users are deleted in the same way that they are added.
o Browse the list
This menu allows you to check the list of users registered in the control unit. The "N:" indicates the user
number allocated when it was created while the figure in brackets indicates its position in the list.
To scroll through the users, use the "+" and "-" keys. To modify the selected user, press the "V" key.
You can then choose to modify or delete the selected user.
To modify a user, the following menu appears:
If a BioFx485 is connected to the control unit, the following menu appears:
ENROLL?
(V) YES (C) NO
If you want this user to become an "Administrator" (function allowing the enrolment of another user
without even opening the control unit enclosure), press the "V" key, otherwise press "C".
• Select the badge status (In service, Not allowed, Badge stolen, Suspended).
• Select the authorisations on readers 1 and 2.
• Select the access time range.
• Enter a surname.
• Lastly, enter a first name.
VIEW EVENTS
• The control unit allows the storage of the last 10,000 events.
• To navigate the different events, use the (+) and (-) keys.
• To display the badge number, then the name of the user concerned by the event (if such is the case),
confirm using the "C" key.
CONTROL DEVICE
MANAGEMENT
This menu allows you to activate or deactivate the programmed control devices using an external
software package. For this, scroll through the various devices then, using the "V" key, activate or
deactivate them.
CONTRAST
ADJUSTMENT
This menu allows you to adjust the contrast of the display using the "+" and "-" keys.
To exit the menu, press the "V" key.
Press the "V" key to start enrolment, otherwise
press "C".
View events
Control device management

Contrast adjustment

p.35/42