Eden ACCESS-IT UNIT Notice Technique page 37

Technical information ACCESS-IT UNIT
This menu comprises:
UNAUTHORISED
ENTRY INTO
ENCLOSURE
ANTI-PaASS-BACK
DEACTIVATED
RADIO INPUT?
ACTIVATED
ANTI-TIME-BACK
DEACTIVATED
TRANSIT DELAY
DEACTIVATED
SUMMER TIME?
DEACTIVATED
ALERT LEVEL?
0
STANDARD READER
TYPE 1
The following types of reader are available:
Management of Wiegand protocols (management of the last bits sent
HID
by the reader). The number of bits is configurable between 16 and 32.
Management of Wiegand decimal protocols (management of the last bits sent
HID Decimal
by the reader). The number of bits is configurable between 16 and 32.
Choice between 26-bit Wiegand (with or without management of site code)
Wiegand custom
and 30-bit Wiegand (with or without management of site and distributor codes).
Management of ABA protocol (management of the last characters sent
ABA / ISO2
by the reader). The number of characters is configurable between 5 and 8.
Management of BIOVEIN reader
BIOVEIN
ACCESS IT BIO /
Managment of Access It Bio / Solo reader.
SOLO
Select the input to use as well as the type of contact, to
watch for unauthorised entry into the enclosure.
Two successive swipes of a badge through the same
reader not allowed. For this, a valid badge must enter
through an entry reader and exit via an exit reader.
(The readers must therefore be configured in the
corresponding menu).
Activate / Deactivate the control unit's radio input.
Select the anti time back delay (time after which
a badge outside the cycle can re-enter/exit again).
Select the transit delay time (maximum time after
which a badge accepted on reader 1 will not be
on reader 2 and vice versa).
Activate / Deactivate the summer / winter time
function.
Defines the reader alert level to be recognised
by the control unit.
Defines the communication protocol to be used for
reader 1. Scroll through the different types of reader,
using the (+) and (-) keys.
p.37/42