Specifications - Welch Allyn Scale-Tronix 4802D Mode D'emploi

22 Appendices
AutOFF*
ACCont*
rES
UnitS*
bEEPEr*
rEcALL
USb*
Prtunt*
PrtOPt*
SEt-UP

Specifications

This device is powered by an external power supply. When used together, the device
and the power supply are considered ME equipment.
This displays the number of seconds before the scale turns off when operating on battery power.
Cont
The value prevents the scale from turning off automatically.
This option causes the scale to remain on when plugged in to AC power.
REWEIGH RECALL
Pressing or
0.001 kg
0.002 kg
0.005 kg
0.010 kg
This option allows you to change the displayed weight unit.
Note
Do not change the scale units if you have purchased the kilogram-only option.
KILOS* This option allows the weight to display in kilograms.
POUNDS and OUNCES* This option allows the weight to display in pounds and ounces.
POUNDS* This option allows the weight to display in pounds.
OUNCES* This option allows the weight to display in ounces.
This option determines the audible signal that occurs when a front panel button is pressed, a
weight is obtained, and other actions occur. By default, this option is set to OFF.
This option allows you to turn on the scale in Recall mode. If this option is set to OFF, the
RECALL
button does not operate.
This option allows you to send weight values to a computer.
This option determines whether pounds or kilograms are used in the send data function when
the scale is connected to a computer or a Welch Allyn device.
REWEIGH RECALL
Press or
If the pounds and kilograms indicators are illuminated on the control panel, the data sent is
determined by whichever unit is selected on the control panel.
If the kilogram indicator is illuminated, it will only send data in kilograms, regardless of the unit
selected on the control panel.
If the pounds indicator is illuminated, it will only sed data in pounds, regardless of the unit
selected on the control panel.
REWEIGH RECALL
Press or
PnlPrt
: The current weight is sent to a computer or a Welch Allyn device when
DATA
is pressed on the control panel.
AutPrt
: The current weight is automatically sent when a weight reading occurs.
This option is displayed when you have cycled through all the options. Press and hold the power
button to power down the scale.
Welch Allyn Pediatric/Infant Scale
switches between the following options:
to switch between the following options:
to switch between the following options:
SEND