Oregon 581738 Manuel D'utilisation page 15

STEP 5G:
Install the belt guard (1) from the back, over the belts and finger tighten bolts (2) with washers (3) and nuts (4)
into place. Once both bolts have been installed tighten all the bolts securely.
STEP 6:
Move the table (4) into place by sliding table in from the front of the beam assembly. Install the bolts (1 & 2), flat washer
(7), lock washer (6) and nut (3 & 5) onto each bolt as installed and finger tighten all bolts. Securely tighten all bolts.
K1655
K1625
ITEM PART #
1 581493
2 BAG 580952
3 BAG 580952
4 BAG 580952
5 575856
ITEM
1
2
3
4
5
6
7
BELT COVER
MOUNT LOCATIONS
DESCRIPTION
BELT COVER
1/4-20UNC X 3/4, GR5 HEX BOLT
1/4ID, ZINC-PLT STL LOCK WASHER
1/4-20UNC X 7/32, GR5 HEX NUT
BELT
PART # DESCRIPTION
BAG 580954 3/8-16 X 1-1/4, GR5 CARRIAGE BOLT
BAG 580954 3/8-16X1-1/2, GRADE 8 HEX BOLT
BAG 580954 3/8-16UNC X 21/64, GR8 HEX NUT
580851 TABLE
BAG 580954 3/8-16UNC X 21/64, GR5 HEX NUT
BAG 580954 3/8ID, ZINC-PLT STL LOCK WASHER
BAG 580954 3/8, ZINC-PLT STL FLAT WASHER
Page 11
QTY
1
2
2
2
2
QTY
4
2
2
1
4
6
4