Oregon 581738 Manuel D'utilisation page 12

STEP 4A:
Lift the beam (5) and place it into position aligning the bolt holes of the axle assembly (1) with the mounting bolt holes of
the beam assembly. Part of the beam will overhang the crate and will be supported by the side of the crate. Install the
bolts (2), lock washers (3) and nuts (4). Tighten all four bolts securely.
ITEM PART #
1 578727
2 BAG 580953
3 BAG 580953
4 BAG 580953
5 581740
STEP 4B:
Install the swing leg (1) in the lowered position. Install the pin (3) with the snap ring (4) through the top hole. Install the
hitch pin (2) through the bottom holes in the beam and swing jack leg. Install the R-clip to secure pin.
STEP 4C:
Raise the axle-beam assembly high enough that the crate can be removed and discarded. Lower the splitter to the
ground for the final assembly.
K1650
DESCRIPTION
AXLE ASSEMBLY
3/8-16X1-1/2, GRADE 8 HEX BOLT
3/8ID, ZINC-PLT STL LOCK WASHER
3/8-16UNC X 21/64, GR8 HEX NUT
BEAM ASSEMBLY
K1651
ITEM PART #
1 581492
2 BAG 580951
3 BAG 580951
4 BAG 580951
QTY
1
4
4
4
1
DESCRIPTION
LEG
1/2' X 4 1/4" SWIVEL HITCH PIN
1/2DIA, 3-3/4LG GROOVED PIN
CLIP, E-STYLE, 1/2, YEL-ZINC STL
Page 8
K1653
K1654
QTY
1
1
1
1