Extension Leads; Recommended Use; Caratteristiche Tecniche; Noise Conditions - Fox F12-961A Manuel D'instructions

EXTENSION LEADS

Only use three conductors extension leads, with a plug with two plugs and a earthing contact and sockets with
two holes and a earth corresponding to the plug of the tool. When using an electric tool at a remarkable
distance from the power supply, use an extension lead with sufficient dimensions to transport the current which
the tool needs. If the extension cable has not the sufficient dimensions a voltage drop can occur, thus causing
an overheating and a voltage loss. You can only use extension leads which are in compliance with CE
standards.
Extension lead length: ....................................................................................................................... up to 15 m
Cable dimensions: ............................................................................................................................ 3 x 2,5 mm²
Before using any kind of extension lead, check that it has not bare wires and that the insulation is not cut or
worn. Repair and change immediately it if it is damaged or worn.
WARNING:
EXTENSION CABLES MUST BE ARRANGED AWAY FROM THE WORKING AREA IN
ORDER THAT THEY DO NOT GET IN CONTACT WITH THE WORKPIECES, THE TOOL
OR OTHER PARTS OF THE MACHINE, THUS CREATING POSSIBLE RISKS.
WARNING:
KEEP THE TOOLS AND THE EQUIPMENT AT A SAFE DISTANCE FROM CHILDREN
This tool has been designed for drilling steel, metals, wood, plastics and all kind of materials in
general, except for hardened steel, by using suitable bits and by selecting the suitable speed
according to the material you are cutting and the tool you are using.
Motor power: ........................................................................................................................... 1100 W
Speed levels: .............................................................................................................. 150-2020 min-1
Bit dimensions: ......................................................................................................................... 32 mm
Max drilling capacity(steel) : ...................................................................................................... 32 mm
Distance between chuck and column: ..................................................................................... 226 mm
Chuck stroke: .......................................................................................................................... 125 mm
Workbench dimensions: ................................................................................................ 364 x 364 mm
Morse cone: .................................................................................................................................. MT4
Height: .................................................................................................................................. 1730 mm
Net weight:................................................................................................................................ 135 kg
The noise emitted, measured in conformity with the standards EN 11688-1, EN 11688-2 is:
- Sound power level LWA ....................................................................................................................... 75 dB(A)
- Uncertainty of measurement K .................................................................................................................... 4 dB.
Noise levels are emission levels and do not necessarily indicate safe working conditions. Even if there is a
connection between emission levels and exposure levels, the first ones cannot be used to determine safely if
other precautions are necessary. The factors that can influence the actual exposure level of the operator
include exposure length, environment features and other sources of noise, as for example the number of
machines and operations present. Besides, exposure levels can change from country to country. However,
these instructions enable the user of the machine to better evaluate the dangers and risks.
Drill press noise emission is very low and thus not dangerous for the user, however, if other tools are working
or in case of noisy environment ear protection devices could be necessary.
EN

RECOMMENDED USE

CARATTERISTICHE TECNICHE

NOISE CONDITIONS

16