Klarfit 10032653 Mode D'emploi page 18

EN
18
• Make sure all previous parts (C + D) are tightened.
• Make sure that both sides are the same height before attaching them.
• Fasten the T-pipes (L + R) at the four ends with the long screw with plastic
head (1).
• First fasten the upper T-tubes, as this will make it easier to fasten the
lower tubes.
CAUTION
Risk of injury! Before each use, make sure that all screws are
properly tightened and that the feet, rod, and frame are not
wobbling.
Step 8
Step 9