Technical Specifi Cations - Clarke SA40 Mode D'emploi

A - ENGLISH
A CCESSORIES / OPTIONS
In addition to the standard components, the machine can be equipped with the following accessories/options, according to the machine specifi c use:
• Brushes with harder or softer bristles
• Pads with more or less abrasiveness
• Shelf Charger
• Battery Full Indicator
For further information about the above-mentioned accessories, contact an authorized Retailer.
TECHNICAL SPECIFICATIONS (as installed and tested on the unit)
Model
Model No.
Voltage, Batteries
Battery Capacity
Protection Grade
Sound Pressure Level
IEC 60335-2-72: 2002 Amend. 1:2005, ISO 11201
Gross Vehicle Weight / Transport Weight
Empty Weight
Maximum Wheel Floor Loading (center front)
Maximum Wheel Floor Loading (right rear)
Maximum Wheel Floor Loading (left rear)
Vibrations at the Hand Controls (ISO 5349-1)
Vibrations for the Whole Body (ISO 2631-1)
Gradeability Transport
Gradeability Cleaning
Type
Aluminum
Electrical / motors / engines - misc.
Ferrous metals
Harnesses / cables
Liquids
Plastic - non-recyclable
Plastic - recyclable
Polyethylene
Rubber
A - 22
INSTRUCTIONS FOR USE
SA40 20D
56104487
V
Ah
dB(A) 63 dB LpA, ±3 dB KpA
lbs / kg 897 / 407
lbs / kg 620 / 281
psi / N/mm 160 / 1.10
2
psi / N/mm 2 139 / 0.96
psi / N/mm 135 / 0.93
2
m/s 2
m/s
2
14% (7.1°)
8.3% (4.75°)
Material Composition and Recyclability
% of machine weight
SA40 - 56091196
24V
260
IPX3
0.17
0.01
% recyclable
2%
14%
41%
6%
0%
4%
5%
27%
1%
100%
38%
100%
83%
0%
0%
100%
90%
33%
1/2016