Fill The Solution Tank - Clarke SA40 Mode D'emploi

INSTRUCTIONS FOR USE ENGLISH - A

FILL THE SOLUTION TANK

Read the cleaning chemical label and calculate the proper amount of chemical to mix for a tank that holds 12 US gallons (45 liters).
Open the Solution Tank Fill Cap (5) or the Solution Tank Rear Fill Port (17), then fi ll the tank 1/3 full of water, add the cleaning chemical, then fi ll up the tank the
remainder of the way. The amount of solution in the tank can be observed by looking at the Solution Tank Level Sight Tube (31).
CAUTION!
Use only low-foaming, non-fl ammable liquid detergents intended for automatic scrubber machine applications. Water temperature
should not exceed 130 degrees Fahrenheit (55 degrees Celsius).
1/2016 56091196 - SA40 A - 13