Making A Recording Using The Web Interface - Eminent EM6104 Mode D'emploi

used the wizard or if you do not have set a password and click 'Login.
3. Click the 'Live View' icon after which the live image(s) of the camera(s) will be
shown.
4. Click the 'Capture' button at the lower part of the screen after which the image will
be captured.
5. The captured image will be shown directly.
Hint: You can always view the captured images again. Click 'Configure' and copy the
'Snap Path' or write this path down. If you open your Windows Explorer (or Internet
Explorer) and then paste the path into the address bar, you will see a folder with the
name of the recorder's IP-Address. Open this folder and then open the 'Capture'
folder. After this, open the channel folder to view the image.

10.2 Making a recording using the web interface

You can also make a record and/or backup using the web interface of the surveillance
recorder. Use the following steps to do so:
Hint: In order to be able to make a recording using the web interface when using
Windows Vista, Windows 7 or Windows 8, you need to make sure you have started
Internet Explorer as 'Administrator'. You need to right-click the 'Internet Explorer' icon
and choose 'Run as Administrator' after which the web browser will be opened.
1. Fill out the IP-Address of the surveillance recorder in the address bar of the web
browser and press the 'Enter' key. Or, fill out the IP-Address of the surveillance
recorder followed by the port number you have set. If you have port '85' as 'HTTP'
port, you need to fill out the IP-Address of the surveillance recorder followed by
the port number. For Example: http://192.168.1.25:85
2. You need to login using an admin account. Fill out the password you have set
during the wizard and click 'Login' or do not fill out a password if you have not
used the wizard or if you do not have set a password and click 'Login.
3. Click the 'Live View' icon after which the live image(s) of the camera(s) will be
shown.
4. Click the 'Rec' button at the lower part of the screen after which the images will be
recorded.
5. Once you have recorded the images you want, click the 'Rec' button once more to
stop the recording.
Note: All available channels will be recorded once you click the 'Record' button.
Hint: It is possible to set a 'sub stream' and a 'mainstream' recording. A 'sub stream' is
a recording which will use less frames per second and uses a lower resolution, which
means the necessary amount of storage capacity is less compared to using a 'main
stream' recording. A 'main stream' recording uses the regular resolution and shows
the images more fluently. Also, when using a smartphone to view the life images, the
'sub stream' option will require less network capacity, since the resolution and frames
21 |
ENGLISH