Using The Surveillance Recorder; Connecting The Surveillance Recorder To Your Television Or Monitor; Connecting The Mouse To The Surveillance Recorder - Eminent EM6104 Mode D'emploi

5. VGA connection. Connection to connect a VGA cable to receive the
surveillance recorder's image (Recommended).
6. A-Out: Audio out channel. Can be used to connect to an analogue receiver
or powered speaker. V-Out: Can be used to connect a CVBS cable to
receive the surveillance recorder's image(s).
7. Video-In: Are used to connect the camera's to.
8. Audio-In: Can be used to connect a microphone to. You can place a
microphone at each camera and connect the microphone to the
corresponding Audio-In channel.
9. Connections used to connect external devices to. An external source can,
for instance, be a door switch. You can connect this device with 1 cable to
the Common pin and 1 cable to the Input (1,2,3,4,5,6,7,8) pin. To connect a
cable, use a screwdriver to push the orange lip above the pin.

3.0 Using the surveillance recorder

During the following chapters we will explain how to setup the Eminent surveillance
recorder and how to install the cameras. It is recommended to setup the surveillance
recorder and install the cameras at your desk before installing and mounting the
surveillance recorder kit at the desired location. This way, you can easily setup the
surveillance recorder and check whether the cameras are working correctly.
3.1 Connecting the surveillance recorder to your
television or monitor
1. Take the surveillance recorder out of the packing.
2. Connect the surveillance recorder to a monitor which has a VGA connection. Also,
you can connect the surveillance recorder to a special security monitor which has
a BNC connection. If you connect the surveillance recorder to a television which
has a cinch connection, then you can use an optional BNC to cinch converter.
(You can also use the surveillance recorder without the use of a monitor, then you
can view the images of the surveillance recorder through your network, using a
computer).
3. Connect a video cable to a BNC 'VIDEO-OUT' connection of the surveillance
recorder, or connect a video cable to the VGA connection of the surveillance
recorder.
4. Connect the other end of the video cable to a BNC connection of your monitor, or
connect the cable to the VGA connection of your monitor.

3.2 Connecting the mouse to the surveillance recorder

1. Take the mouse out of the packing.
2. Connect the USB mouse to the USB port on the surveillance recorder which has
the 'Mouse'.
5 |
ENGLISH