Project Source FS1A9260CP Mode D'emploi page 5

ASSEMBLY INSTRUCTIONS
3. Slide rubber washer (C) and metal washer
(D) over threaded rods. Use the lock nuts (E)
to secure the rubber washer (C) and metal
washer (D).
4. Attach the extension rod (BBB) to one lock nut,
feed a screwdriver (not included) through the
bottom of the extension rod, and then tighten the
lock nut. Repeat for second lock nut.
5. Attach water supply lines (not included) to the
faucet (A).
3
C
4
5
5
1
1
D
E
E
BBB
2
1 1
1
1
2
1
2