Removing The Shelf; Assembling The Shelf; Humidity Controlled Crisper - LG LTNS16121V Manuel Du Propriétaire

17 OPERATION

Removing the shelf

1. Lift the back of the shelf from below.
2. Use enough force to lift the shelf and release it
from the holders.
3. Slide the shelf forward to remove it completely.
1
2
3
Shelf

Assembling the Shelf

1 Slide shelf into rails until it stops.
.
2. Gently push down on back of shelf to tuck
flanges under ribs on rear cabinet wall.
3. Make sure flanges are tucked completely
under ribs to assure stability of shelf.
Shelf
Holder
Rib
CAUTION
Do not clean glass shelves with warm water

while they are cold. Shelves may break if they´re
exposed to sudden temperature changes or
impact.

Glass shelves are heavy. Use special care when
removing them.

Humidity Controlled Crisper

The crispers provide fresher tasting fruit and
vegetables inside the drawer.
Removing/Replacing the Crisper:
1. To remove the crisper, pull it out to full extension,
lift the front, and pull straight out.
2. To replace the crisper, slightly tilt up the front,
insert the drawer into the frame, and push it
back into place.