Coway airmega 400S Manuel D'utilisation page 12

02 PREPARATION
Control Panel (300S/300)
300S
[Wi-Fi] button/indicator
Touch this button to connect to a Wi-Fi
network. When the Wi-Fi connection is
completed, the indicator is turned on.
* The status of Wi-Fi LED :
- Blinking : Not connected yet or in the
pairing process
- Constant LED: Wi-Fi connected
- LED off: Wi-Fi off
300
[Timer] button/indicator
Touch this button to automatically turn
off after an hour, 4 hours, or 8 hours.
NOTE
For 300S users, you can set the timer
and scheduler using Airmega mobile
application.
[Pre Wash] button/indicator
Shows the time of pre-filter cleaning cycle. When
the letters on the button is lit, clean the pre-filter.
* A fter cleaning the pre-filters, touch and hold this
button for 2~3 seconds to reset the indicator.
[Max2 Change] button/indicator
Shows the time of Max2 filter life. When the letters
on the button is lit, replace the Max2 filters.
* A fter replacing the Max2 filters, touch and hold
this button for 2~3 seconds to reset the indicator.
12
Checking the product
[Light] button
Touch this button to turn the air
quality indicator and light on or off.