Reel-Multimedia ReelBox Serie Mode D'emploi page 35

Teletext
Background transparency: Set

the degree of transparency of the
background of teletext pages.
Permitted values 0-255
(0 = completely transparent, 170 =
standard, 255 = not transparent)
Show clock: Specifies whether the

time should be displayed at the top
edge of the teletext window.
(yes, no)
OSD height: Height of the teletext

window in pixels
OSD widht: Width of the teletext

window in pixels
 Specify various button allotments
About
Information is provided here on the
software version being used in the
ReelBox, the available hardware
components as well as various
system settings.
System: Operating system that is
being used
Software version: Exact version
number of the software used
Drive 1: Type designation of the
internal DVD drive
Drive 2: Type designation of the
internal hard disk drive
Tuner Slot 1: Tuner used in tuner
slot 1 (DVB-S, DVB-C, DVB-T)
Tuner Slot 2: Tuner used in tuner
slot 2 (DVB-S, DVB-C, DVB-T)
RAM: Size of the internal memory
(in megabyte)
CPU Temperature: Temperature of the
central processing unit
Mainboard Temperature:
Temperature of the main board
Operation
Network (red button on remote
control)
You can display information
(IP address, network mask,
hardware address) of the various
network interfaces.
Signal (green button on remote
control)
You can check the signal strengths
here for audio and video through
your cable connection, your digital
antenna or your satellite dish.
STR = Signal strength
Should be at least 60 % for a
stable reception. With cable
connections, the signal strength
can be influenced directly by the
cable service provider. If the
values are too low, check the
corresponding feed lines and
contact the cable service provider
if necessary to increase the power.
GB
33