Unitron uStream Guide page 21

2. Ensure the uTV 3 is turned on and place the
uStream into the charging cradle.
3. Allow two hours for a full charge.
Pairing uTV 3 to uStream (not required for
uTV 3 + uStream bundle)
1. Turn on the uTV 3 and press the pair button
on the back of the uTV 3.
2. Starting with the uStream in the off
position, press and hold the ( ) button
and turn the uStream on. The blue audio
indicator will flash.
3. After successful pairing, the blue audio
indicator on the uStream and the uTV 3
will stop blinking.
Playing back audio from your TV
1. Begin playback on your TV.
2. Adjust the volume level on the uTV 3 to
a medium to high level.
3. Make minor volume adjustments with the
uStream volume buttons (
32
).
Pausing playback
If you want to temporarily stop streaming to
hear a conversation, press the ( ) button to
pause the streaming. Press the ( ) button
again to resume streaming.
Stopping playback
To stop playback on your device and switch
back to regular hearing programs, press and
hold the access ( ) button for two seconds.
Changing hearing aid programs is not possible
while streaming.
Please contact your hearing healthcare
professional if you can not complete the pairing
procedure with the steps described.
To listen to stereo music from your device,
it must support the A2DP/"Stereo Headset"
profile.
uStream is capable of streaming up to four
hours with a fully charged battery.
33