Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MINIGEL PLUS 1/2/3
(A)
ON / OFF key (on dispensers with more than one tank, this key is only present on the right-hand tank control panel): press
it for one second to turn the dispenser on or off. When the appliance is in use, press it briefly to turn the lights on or off, where
featured.
(B)
Status indicator light (on dispensers with more than one tank, this indicator light is only present on the right-hand tank control
panel): if it is on, this means the main switch situated under the dispenser is turned on and the appliance is powered and
ready for use.
(C)
Plus key: in ice cream production mode, this key increases the density of the product.
(D)
Minus key: in ice cream production mode, this key decreases the density of the product.
(E)
Conservation key: allows you to select the product conservation operating mode. On dispensers with more than one tank, if
you hold this key down while the tank is in product conservation mode, the corresponding tank will be turned off. If you press
it for two seconds, the dispenser switches to "Cleaning" mode: the mixer is on but the cooling is off.
(F)
Conservation indicator light: flashing light => product conservation mode selected, conservation temperature not reached.
Indicator light permanently on => product conservation mode selected, temperature reached.
(G) Ice cream production indicator light: flashing light => ice cream production mode selected, product not ready. Indicator light
permanently on => ice cream production mode selected, product ready.
(H)
Ice cream production key: allows you to select the ice cream production operating mode. On dispensers with more than one
tank, if you hold this key down while the tank is in ice cream production mode, the corresponding tank will be turned off.
(I)
Compressor icon: icon ON => compressor ON. Icon OFF => compressor OFF. Icon blinking => compressor OFF delay in
progress (factory default PA14=180 seconds)
(J)
Solenoid valve icon: icon ON => solenoid valve open. Icon OFF => solenoid valve closed . Icon blinking => solenoid valve
closed time in progress (factory default PA15=20 seconds)
(K)
Service Mode Icon: icon ON => the machine has been started in Service Mode (main switch + key A) and it is possible to set
the working parameters.
(L)
Super Service Mode Icon: this icon and icon (K) ON => the machine has been started in Super Service Mode (main switch
+ key A) and it is possible to set the factory parameters.
(M) Liquid product icon: actualy not implemented
(N)
Temperature Alarm Icon: icon ON => the temperature of the product raised over the warning temperature (PA21= 4°C set
as factory default)
(O) Open top cover icon: icon ON => the top cover is open and the machine can't work (in case of machines with multiple con-
tainers, only the one with the open top cover is stopped).
(P)
Viscosity setting: graphical representation of the set value of the viscosity of the product
(Q) Temperature of the product into the bowl
(R)
Temperature scale: temperature scale as set by parameter PA08
(S)
Dispensing Icon: icon ON => the cup sensor has detected the presence of a cup and the speed of rotation of the mixer is
increased to the value of the parameter PA03
figura 3
31
Publicité
Table des Matières
