Macros (Sequence Of Commands) - One for All URC-7557 Manuel D'installation

Macros
Macros (Direct)
You can program your ONE FOR LL 5 to issue a sequence of commands at
the press of one button. ny sequence of commands you regularly use can be
reduced to one key stroke for your convenience. For example, you may want to
turn off your TV, VCR and Satellite at the same time.
Example: To set up the Macro mentioned above on the key labeled
"Radio" on your ONE FOR ALL 5:
1 Press and hold the MAGIC key until one of the device keys will
blink twice. The red LED underneath the corresponding device key
(depending on the device mode that was selected) will blink once then
twice.
2 Press 9 9 5.
3 Then press the Radio key to which the Macro will be assigned.
4 Next press TV, POWER, VCR, POWER, SAT, POWER.
5 To store the Macro, press and hold MAGIC until the device key blinks
twice (the device key will blink once then twice).
6 Whenever you press the "Radio" key, the ONE FOR LL 5 will turn off
your TV, VCR and Satellite.
• To erase the Macro from the Radio key, press:
MAGIC* 9 9 5
*Here you must hold down M GIC until the device key blinks twice.
14
Extra Features
(Sequence of commands)
Radio key MAGIC*
WWW ONEFORALL COM