Volume Punch-Through - One for All URC-7557 Manuel D'installation

You may be able to use some functions of your Television, Video recorder,
DVD player, mp./Tuner, Satellite receiver or Cable converter at the same time.
For example: if you are watching a program on your video recorder, you can
adjust the volume (a TV function) without pressing the TV mode key on your
ONE FOR LL 5.
To punch through to TV volume while in the VCR, DVD, AMP or SAT
mode:
1.
2.
3.
To cancel the "Volume Punch Through" per mode:
(Example: to cancel the "Volume Punch Through" for the VCR mode)
1.
2
3.
4.
Result: being in VCR mode, you will be able to control VOL+/- or MUTE
functions of your VCR (provided it has volume control).
To cancel the „Volume Punch Through":
1
2.
3.
WWW ONEFORALL COM
Extra Features
Volume Punch Through
Press and hold the MAGIC key until one of the
device keys will blink twice. The red LED underneath
the corresponding device key (depending on the device
mode that was selected) will blink once then twice.
Press 9 9 3.
Then press the TV key and the red light will
blinktwice.
Press VCR once.
Press and hold down MAGIC until the ONE FOR ALL
5's VCR key blinks twice (the red LED underneath the
VCR key will blink once and then twice).
Press 9 9 3.
Then press the Volume (-) key and the red light
will blink four times.
Press and hold the MAGIC key until one of
the device keys will blink twice. The red LED
underneath the corresponding device key
(depending on the device mode that was
selected) will blink once then twice.
Press 9 9 3.
Press the Volume (+) key and the red light will blink
four times.
13