Sienna SSM-4003 Manuel D'instructions page 7

and carefully remove cloth pad (L) from steamer head (K). Store the unit upright in a dry area.
NOTE: For storing your mop in small tight spaces, fi rst release power cord from the quick release
cord wrap, then press button in the front of the unit between the lower handle tube and top of
steamer body to release the handle. Pull handle upward to remove. This may take some force.
CAUTION: The cloth pad may be very hot.
Carpet Glider
12) Lay carpet glider (N) on the fl oor in an upright position with the triangular fl at surface facing
downward. Place steamer head (K) on top of glider.
IMPORTANT: The carpet glider is not designed to be fi xed to the fl oor head for safety reasons
including preventing burns. It is designed for use on soft carpet areas only, not for hard fl oor
surfaces.
7