Assembly And Use - Sienna SSM-4003 Manuel D'instructions

1) Press the adjustable handle locking switch (D) to telescope the handle (A) to desired length.
2) Attach handle (A) to steamer body (J).
3) Attach steamer body (J) to steamer head (K).
4) Set cloth pad (L) on the fl oor with microfi ber side down. Align self adhesive strips at the
bottom of steamer head (K) with cloth pad (L). Place unit on top of cloth pad (L) and apply
pressure to assure hold.
5) Unscrew the water tank cap (G) and fi ll water tank (H) with cool tap water by using refi ll cup (M)
provided.
NOTE: The steamer does not require distilled water. Residents in areas with hard water should use
distilled water for better performance.

ASSEMBLY AND USE

5