Rollei Profi Funk-Sender Notice D'utilisation page 31

Functions
7. How to open Canon RT mode (ZGB):
Press the power switch shortly
The display will show the following sign
matically shut down if the RT mode is activated .)
This mode is only available on the Canon trigger and can only work with
Canon products that support the same system .
8. How to set the Canon ID under the Canon RT mode (ZGB)?
Press the power switch shortly
CH / ID will be shown on the display . Then shortly press the CH button to
switch the CH to ID . Press the plus or minus button to change the value, so
that the flash and the trigger do have the same ID .
, to open the RT mode (ZGB) .
. (The RF mode will auto-
to open the RT mode (ZGB) . The signs
31