Inserting Batteries; Attaching To The Camera - Rollei Profi Funk-Sender Notice D'utilisation

Installation

1. Inserting batteries:

Open the battery compartment on the backside of the trigger by sliding .
Insert 2 AAA 1 .5 V batteries by taking care of the correct polarity of the
battery (this is marked inside the battery compartment) . Then close the
compartment again .

2. Attaching to the camera:

Before connecting the trigger to your camera make sure that both devices
are turned off . Then slide the trigger into the hot shoe of your camera until
you hear a click sound . This indicates that the trigger is inserted correctly .
To remove the trigger from the camera push the safety interlock button and
then slide it backwards .
3. Power ON / OFF:
To turn the trigger on please press Power button for about 2 seconds . To turn
the device off press the Power button again for about 2 seconds .
27