Functions - Rollei Profi Funk-Sender Notice D'utilisation

Functions

28
1. Power value:
M: In the manual mode the
power can be set from 1 .0 ~ 9 .0 .
The minimum power output is 1 .0
and the maximum one is 9 .0 . For
a small adjustment in increments
of 0 .1 f stop press the up or down button shortly and the value will be
adjusted accordingly . For big adjustments press the up and down button for
about 2 seconds and the value will be changed by 1 f stop .
TTL: In the TTL automatic mode the power can be adjusted from -3 .0 ~ +
3 .0 . The minium exposure compensation value is -3 .0 while the maximum
value is +3 .0 . The values can be changed in increments of 0 .3 .
Changes on the flash power output will be transmitted to the flash but not always be shown correctly on
the flash' display.
ENGLISH
1
2
3
4
5
6