Rollei Profi Funk-Sender Notice D'utilisation page 29

Functions
2. Group A / B / C: In the same channel up to 3 groups (A/B/C) can be
controlled independently . Within each group the number of flashes is not
limeted . By pressing the group button repeatedly you can select the group of
which you would like to change the mode or power value .
3. Shooting modes: There are two modes that can be used, M = manual
mode and TTL = automatic exposure mode .
4. Flash modes: By pressing the sync button repeatedly you can switch
between the different sync modes:
Front curtain sync = There is no icon displayed on the display .
Rear curtain sync = The icon for rear curtain sync
High speed sync = The icon for high speed sync
This is the default flash mode .
on the display .
is shown
is shown on the display .
29