ARIETE 1363 Instructions D'utilisation Et Consignes De Sécurité page 16

Always remove the power plug
efore cleaning or maintenance
Never immerse the device in water
or other li uids
Threat of damage due
to other causes
Do not lift the device y the water
tan , instead always lift it y its
whole ody
Find a well lit, clean surface with
easy access to a plug
Avoid over lling the water tan
Never leave the appliance unat-
tended whilst connected to the
power supply
The device must e placed and
used on a sta le surface
Do not use the appliance if it has
een dropped, if it has visi le dam-
age or if it is lea ing Do not use
the device if the power supply or
plug are damaged or the device
loo s defective All repairs and
replacements of the power ca le
may only e performed y entro
Assistenza Ariete or an engineer
authorised y Ariete to prevent
possi le ris s
16
aution - Ris of Damage
Place the machine on a sta le sur-
face where it cannot e noc ed
over
Do not switch the device on if there
is no water in the water tan as
this will urn through the pump
Never ll the water tan with hot
or oiling water
Do not place the machine on hot
surfaces or near open ames to
avoid damage to the casing
Do not use spar ling water (with
added car on dio ide
Only use the pads from the ESE
system
Never put other items in the lter
holder
Do not e pose the machine to any
environmental temperatures of
under 0 as the leftover water in
the water tan will freeze and could
cause damage to the machine
Do not use the device outdoors
This appliance must not e e -
posed to atmospheric conditions
(rain, sun etc
After you have pulled the plug and
the components have cooled down,
only clean to device with a soft,
light, damp cloth and a few drops
of neutral, non-aggressive washing
li uid (never use solvents which
might damage plastic